120€
The weight of the fin is only 47 grams.
4 layers of carbon
280€
One crankshaft journal, (freewheel side) for INA.
When replacing, you will need to disassemble the original crankshaft
450€
Made of AlSi10Mg with standard pitch, 3D printed, using SLM technology.
Folding prop for:
399€
Impeller made of AlSi10Mg with standard pitch, 3D printed, using SLM technology.
Stainless steel or titanium avariable.
Shaft made of stainless steel X46Cr13 with HRC 53.
280€
Unique curved streamlined design, improved original model.
Better stabilization and dynamic stability control.
499€
Suitable for JS. Inner diameter — 94mm (suitable for Sterk impellers).
Straightener with 8 blades + long rear fairing.
299€
Bag for electric skateboards and mountainboards. Internal dimensions 118 * 43 * 28 sm
Fits the largest electric MTBs with 9 inch wheels. Wheels and shoulder straps included
199€
Allow to instal on anyone MTB or Skateboard a handlebar with SCS compression.
3D SLM Aluminium printed
SCS Clamp and handlebar avariable to order too
99€
Allows you to remove the jet pump from the board housing.
Also can press the impeller shaft out of the bearing assembly.
499€
Inner dimensions: 190*70*20 sm
Case contains two small and one large pocket and wide straps are , comfortable, and durable (can be hidden). Also case has a wheels.
149€
Allow to install FCS II main fin in standrt JS platform.
3D SLM printed Aluminium . The lightest — only 91 gr.
109€
Guard for jet pump. 3 mm stainless steel with 7 mm step between rails.
Connection without any changes on the casing: on the back side — abut against the partition of the arch of the water canal; on the other side, it is held by 2 magnets with a total grip of 20 kg.
109€
Guard for jet pump. 3 mm stainless steel with 7 mm step between rails.
Connection without any changes on the casing: on the back side — abut against the partition of the arch of the water canal; on the other side, it is held by 4 magnets with a total grip of 40 kg.
Trust loses — 4% (without quads titanium give 80 kg, with guard — 77 kg).
499€ wireless
399€ wired
Two versions: wired and wireless
Handle specifications:
-IP68
-LCD Display 240×320
-Ability to use safety magnet key
-GPS
— QI wireless charging
Display: GPS speed, motor RPM, motor/ESC/ battery temperature, battery voltage, stopwatch
Transmitter board specification:
— feeding from traction voltage (up to 60V)
— CAN interface (connection to power ESC)
129€
More efficiency from jetpump at high RPM
799€
Suitable to liftfoils masts (efoil).115 sq and 175 sqinches. Very agile.
399€
Shaft mounted impeller.
Under request avariable a straightener and nozzle.
599€
The first decks in the world manufactured under longeron construction.
Therefore have we have a high torsion trickiness by and comfortable flex. We based as a matter of experience we can get you a minimal weight with maximus efficiency
89€
Allow to install kite foot pads and straps on JS
